 |  | | | |  |  |  |  | Scope for Benjamin 392 |  | |  |  |  |
Posted: Tue Jun 23, 2015 9:48 pm |
|
|
| Nodlenor |
| New Member |

|
 |
| Joined: 14 May 2015 |
| Posts: 4 |
| Location: Harris, Missouri |
|
|
 |
| Does the Benjamin 392 require an air gun scope or can a regular scope be used? |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Thu Jun 25, 2015 6:44 pm |
|
|
| AirGunEric |
| Site Admin |

 |
 |
| Joined: 20 Jan 2007 |
| Posts: 6931 |
| Location: "Out There" |
|
|
 |
| You can put any scope you want on it- but you will need the proper mounting system for the Benjamin (it does not have any ability to mount optics as-is from the factory). |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Thu Jun 25, 2015 7:09 pm |
|
|
| Nodlenor |
| New Member |

|
 |
| Joined: 14 May 2015 |
| Posts: 4 |
| Location: Harris, Missouri |
|
|
 |
| Thanks for your reply. I already have mounts I just needed to know about what scope I needed. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | a late reply here |  | |  |  |  |
Posted: Fri Nov 20, 2015 11:57 pm |
|
|
| dcw |
| Member |

|
 |
| Joined: 30 Oct 2015 |
| Posts: 18 |
| Location: SoCal |
|
|
 |
but...i would highly recommend a lower powered fixed power, such as a 4x, or 6x.
the close range(s) air rifles normally engage a target at don't require huge magnifications any many scopes designed with adjustable power and AO are very difficult to adjust at ranges of 15 yards and closer.
JMO...
 |
|
_________________ never squat when wearing spurs---will rogers |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sat Nov 21, 2015 8:13 am |
|
|
| Slavia |
| Moderator |

 |
 |
| Joined: 31 Mar 2008 |
| Posts: 4382 |
| Location: Waseca, Minnesota, USA |
|
|
 |
I agree with Eric - if it's not a springer you can mount any kind of scope that you want.
Which scope depends on what you want to do with it. I have a 4X32AO with a duplex reticle on my Slavia. I use that gun mostly in the basement, always at 10m. I don't really even need the AO in that case. I have a Crosman G1 with a 3-9X32AO mildot scope that I use at 100 yards. Same thing - the AO stays on 100 yards, and the magnification stays on 9X. (I do like the mildots for windage, however.) My HW97 with a 4-16X40AO mildot scope covers everything in between. In that case I do use the mildots, adjustable AO, and variable magnification.
It also depends on what you want to shoot at. Toothpicks in the basement or spent 12 gauge shells at 50 yards pretty much require crosshairs and magnification. You have to be able to see something to hit it. On the other hand, My Sheridan has a red dot sight. That one I use for pop cans inside of 30 yards, and the red dot does just fine. |
|
_________________
¡Listo! ¡Apunte! ¡Fuego! |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sat Nov 21, 2015 5:01 pm |
|
|
| toadmyster223 |
| Senior Member |

|
 |
| Joined: 20 Mar 2012 |
| Posts: 501 |
| Location: Fayette Nam, PA |
|
|
 |
| Aren't airgun scopes typically made with a parallax correct-distance of 50 yards, instead of 100 like most rifle scopes? I may be mistaken. I'm foggy on details |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sat Nov 21, 2015 11:10 pm |
|
|
| Slavia |
| Moderator |

 |
 |
| Joined: 31 Mar 2008 |
| Posts: 4382 |
| Location: Waseca, Minnesota, USA |
|
|
 |
| Quote: |
| Aren't airgun scopes typically made with a parallax correct-distance of 50 yards, instead of 100 like most rifle scopes? |
Out of curiosity I looked at several manufacturers' product lines. While your numbers may not be exact, they aren't bad, and they do illustrate the point that parallax correction will vary with advertised (intended) use. Scopes for centerfire/rimfire/shotgun/airgun/crossbow are not all set up the same. The tricky part is that the parallax-corrected range isn't always indicated. I looked at Leupold, Simmons, Hawke, and Centerpoint. Each of them listed that range for just a few models.
I'm sure they would provide the information if contacted. When considering a fixed-parallax scope for the narrow window where airguns operate that might be a good thing to ask.
As an aside, I found this article on calculating parallax error:
http://rimfirebenchrest.com/articles/parallax.html |
|
_________________
¡Listo! ¡Apunte! ¡Fuego! |
|
 |
 |
|
|
|  |  |  | | | |  |  |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|