Click Here for AirGunHome.com Main Page
Argentina Australia Belgium Canada Chile Denmark France Germany Greece India
Italy Mexico New Zealand Netherlands Norway Russian Federation South Africa Spain Turkey United Kingdom United States
AirGunHome.com: THE Worldwide Airgun Forum


AirGunSeals.com Main Page Link
Air Gun Home Forum Index Register FAQ Memberlist Search

Air Gun Home Forum Index » General Air Gun Questions and Topics » Recrowning my Benjamin Discovery Help
Post new topic  Reply to topic View previous topic :: View next topic 
Recrowning my Benjamin Discovery Help 
PostPosted: Thu May 07, 2015 12:50 pm Reply with quote
Ledbetter122
Member
Member
Joined: 24 Feb 2015
Posts: 30
Since I have my gun apart (I was detuning my disco to get 750 fps and I drilled 1 size too big.......because I'm impatient....)

I was going to look at my crown and see if it needed to be re-crowned. I'm seeing a bunch of Slotted Brass Screw with lapping compound used to crowning.

I was wondering couldn't I just use one my 5.56 bullets with compound?

If not what size screw head do I need exactly (my gun is .22 cal), they say slightly larger, but that not specific enough for me to try it myself.


Sorry for the numerous questions I have on this thread, I just want to learn everything I can
View user's profile Send private message
 
PostPosted: Sun May 10, 2015 3:21 pm Reply with quote
AirGunEric
Site Admin
Site Admin
Joined: 20 Jan 2007
Posts: 6931
Location: "Out There"
You can't use the same size as th bore of the barrel- you wouldn't be crowning anything. Likewise, using something made of lead will do nothing.
View user's profile Send private message Visit poster's website
 
PostPosted: Sun May 10, 2015 6:23 pm Reply with quote
Mentolio
Veteran Member
Veteran Member
Joined: 02 Jun 2013
Posts: 207
Location: Sadly, New Jersey
Here are the screws I use: the larger is a 1/4-20 with a head diameter a little under 1/2 inch. This one I used to do my Disco .22. The smaller one is, err...smaller, and I use it for .177 barrels. Head diameter a bit larger than 1/4 inch. Both made of brass, and found at the Home Depot (soft plastic packages hanging on hooks in hardware). Hope this helps!






View user's profile Send private message
 
PostPosted: Tue May 12, 2015 9:21 am Reply with quote
Ledbetter122
Member
Member
Joined: 24 Feb 2015
Posts: 30
Alright I did it, With success I used a 6mm Brass Slot Screw (6mm being the head size not the screw length) and some Valve Grinding Compound (from Auto-Zone)

Thanks for your input guys

This ended up making my groups go from 1/2-1" groups at 20 Yards to almost pellet on pellet.

My buddy actually wanted me to do the same thing to his gun also (Benjamin Titan .177) and it made his groups shrink from a Silver Dollar to a Penny at 20 yards, but go figure his scope blew out 5 shots after the gun actually started shooting good.

We actually thought for a minute that I messed his barrel up (Lol), but we took the scope off and kinda barrel aimed the gun and got penny groups again.
View user's profile Send private message
 
PostPosted: Tue May 12, 2015 3:50 pm Reply with quote
Mentolio
Veteran Member
Veteran Member
Joined: 02 Jun 2013
Posts: 207
Location: Sadly, New Jersey
That's awesome (improved groups...not your buddy's scope dying)! Isn't it amazing how much of a difference a new crown can make? It kinda makes me mad that some manufacturers don't take the (10 minutes or so?) time necessary to make sure something so vital is done properly. I'm glad to worked out for you.
View user's profile Send private message
Recrowning my Benjamin Discovery Help 
  Air Gun Home Forum Index » General Air Gun Questions and Topics
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 5 Hours  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  

Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.


Click Here for AirGunHome.com Main Page


Powered by phpBB © 2001-2004 phpBB Group
Partial Styling Supplied by Vjacheslav Trushkin Themes Database.