Click Here for AirGunHome.com Main Page
Argentina Australia Belgium Canada Chile Denmark France Germany Greece India
Italy Mexico New Zealand Netherlands Norway Russian Federation South Africa Spain Turkey United Kingdom United States
AirGunHome.com: THE Worldwide Airgun Forum


AirGunSeals.com Main Page Link
Air Gun Home Forum Index Register FAQ Memberlist Search

Air Gun Home Forum Index » General Air Gun Questions and Topics » Does Crosman Pre fill airguns before they ship
Post new topic  Reply to topic View previous topic :: View next topic 
Does Crosman Pre fill airguns before they ship 
PostPosted: Thu Apr 30, 2015 12:04 pm Reply with quote
Ledbetter122
Member
Member
Joined: 24 Feb 2015
Posts: 30
I had ordered a Benjamin Discovery a couple weeks ago from Wal-Mart, and IT WAS A USED ONE. The reason I know is because the valve seal was leaking. When I cleaned my gun and fired it a few times it shot out oil between where the bolt housing meets the air tube.

Also a big red flag was Teflon Tape around the Gauge Threads, and I read a forum somewhere that said you should not need teflon tape since the O-Ring prevents any air from even getting to the threads.

Alright, now onto why I'm asking this question. I had returned the gun that I described above and ordered a new one, Which came in the mail today. I took it out of the box and inspected the gun (looking for scratches on the mount to see if a scope had been previously mounted).

I then looked at the gauge and it read 500-600 PSI, I called Crosman with the question and the answer I got was that they do put some air, so the valve will close so people who use pumps will have an easier time filling it up.

Is this really normal (my last one came empty, but then again it was used)?

I'm just very skeptical since my adventure with airguns has been a really rocky road.
View user's profile Send private message
Re: Does Crosman Pre fill airguns before they ship 
PostPosted: Thu Apr 30, 2015 12:46 pm Reply with quote
Bob La Londe
Veteran Member
Veteran Member
Joined: 05 Nov 2014
Posts: 146
Location: Yuma, Az
Ledbetter122 wrote:
I had ordered a Benjamin Discovery a couple weeks ago from Wal-Mart, and IT WAS A USED ONE. The reason I know is because the valve seal was leaking. When I cleaned my gun and fired it a few times it shot out oil between where the bolt housing meets the air tube.

Also a big red flag was Teflon Tape around the Gauge Threads, and I read a forum somewhere that said you should not need teflon tape since the O-Ring prevents any air from even getting to the threads.

Alright, now onto why I'm asking this question. I had returned the gun that I described above and ordered a new one, Which came in the mail today. I took it out of the box and inspected the gun (looking for scratches on the mount to see if a scope had been previously mounted).

I then looked at the gauge and it read 500-600 PSI, I called Crosman with the question and the answer I got was that they do put some air, so the valve will close so people who use pumps will have an easier time filling it up.

Is this really normal (my last one came empty, but then again it was used)?

I'm just very skeptical since my adventure with airguns has been a really rocky road.


I don't know if its normal since both of my Crosman PCPs were refurbs (both came with some air in them), but it makes sense to have a couple hundred PSI in them to keep the valves seated.

_________________
Bob La Londe
http://www.CNCMOLDS.com
http://www.YumaBassMan.com
View user's profile Send private message
 
PostPosted: Thu Apr 30, 2015 7:19 pm Reply with quote
AirGunEric
Site Admin
Site Admin
Joined: 20 Jan 2007
Posts: 6931
Location: "Out There"
There is always some air in their PCP guns- don't know if it's a consistent amount- but most often I have seen a couple hundred psi.

_________________
`

I'd say "I care."

But I'd be lying.


Canadian Airgun Supplier: http://www.scopesandammo.com/storefront
View user's profile Send private message Visit poster's website
 
PostPosted: Sat May 02, 2015 6:39 am Reply with quote
Mentolio
Veteran Member
Veteran Member
Joined: 02 Jun 2013
Posts: 207
Location: Sadly, New Jersey
Both my Mrod and Disco came with a few hundred psi. Good bet that it's not leaking if if does, right?
View user's profile Send private message
Does Crosman Pre fill airguns before they ship 
  Air Gun Home Forum Index » General Air Gun Questions and Topics
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 5 Hours  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  

Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.


Click Here for AirGunHome.com Main Page


Powered by phpBB © 2001-2004 phpBB Group
Partial Styling Supplied by Vjacheslav Trushkin Themes Database.