Click Here for AirGunHome.com Main Page
Argentina Australia Belgium Canada Chile Denmark France Germany Greece India
Italy Mexico New Zealand Netherlands Norway Russian Federation South Africa Spain Turkey United Kingdom United States
AirGunHome.com: THE Worldwide Airgun Forum


AirGunSeals.com Main Page Link
Air Gun Home Forum Index Register FAQ Memberlist Search

Air Gun Home Forum Index » General Air Gun Questions and Topics » An Interesting HPA Failure
Post new topic  Reply to topic View previous topic :: View next topic 
An Interesting HPA Failure 
PostPosted: Tue Apr 28, 2015 7:58 pm Reply with quote
rsterne
Moderator
Moderator
Joined: 15 Jan 2008
Posts: 2998
Location: Coalmont, BC
I got some pics today of an imploded plenum spacer that was between a regulator and valve in a Disco.... Here is a side view, the pellet is to keep it from rolling over....



Here is the other side after a few shots.... The velocity dropped by over 400 fps in about 3 shots as this happened....



End view, showing the imploded section is stretched all the way across the ID of the tube.... Note how a small portion of the circumference of the wall has extruded to about twice it's original width....



Another view of this puzzling failure.... It would appear that the material is about 1/32" wall aluminium tubing....




I think the initial failure was probably a small buckle failure of the tube wall from end compression, combined with a small amount of air in the space between the spacer and the reservoir wall.... Once it collapsed even slightly (the initial collapse may have only moved the wall in 1/32" or so), it had a larger volume of HPA behind it for the next shot, and imploded slightly.... That now much larger space then filled with HPA and on the next shot the much larger volume then expanded and extruded the wall inwards, stretching it into the current shape.... If you look at how much of the tube wall has stretched into the much longer length of the folded in portion, the wall must now be very thin.... One more shot would likely have ruptured it....

When I first heard about this "implosion" I thought it unlikely and suspected to see a buckle failure in the tube wall when I got the photos, but in fact the spacer was within about 1/16" of it's original length.... It would still slide out of the Disco reservoir.... I am not sure of the regulator setpoint, but if we assume it was 1500 psi, the end force on the tube spacer was about 650 lbs. when the reservoir was full, and would have increased during the shot cycle as the pressure in the plenum dropped.... There would not have been much volume of air initially between the spacer and the reservoir wall, but enough that combined with the end load it likely caused an initial buckle failure which then filled with air, and within a few shots imploded the tube spacer to produce the results shown.... It certainly shows the power of HPA, and how completely unexpected things can happen....

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count!
View user's profile Send private message
 
PostPosted: Thu Apr 30, 2015 10:50 am Reply with quote
Bob La Londe
Veteran Member
Veteran Member
Joined: 05 Nov 2014
Posts: 146
Location: Yuma, Az
Do you think a spacer that had had been slotted might not have collapsed in this manner.

_________________
Bob La Londe
http://www.CNCMOLDS.com
http://www.YumaBassMan.com
View user's profile Send private message
 
PostPosted: Thu Apr 30, 2015 11:13 am Reply with quote
rsterne
Moderator
Moderator
Joined: 15 Jan 2008
Posts: 2998
Location: Coalmont, BC
Providing it was strong enough to not collapse from the significant end forces involved....

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count!
View user's profile Send private message
 
PostPosted: Sat May 02, 2015 6:45 am Reply with quote
Mentolio
Veteran Member
Veteran Member
Joined: 02 Jun 2013
Posts: 207
Location: Sadly, New Jersey
How difficult was that to remove?
View user's profile Send private message
 
PostPosted: Sat May 02, 2015 10:02 am Reply with quote
rsterne
Moderator
Moderator
Joined: 15 Jan 2008
Posts: 2998
Location: Coalmont, BC
Slid right out, apparently....

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count!
View user's profile Send private message
An Interesting HPA Failure 
  Air Gun Home Forum Index » General Air Gun Questions and Topics
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 5 Hours  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  

Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.


Click Here for AirGunHome.com Main Page


Powered by phpBB © 2001-2004 phpBB Group
Partial Styling Supplied by Vjacheslav Trushkin Themes Database.