 |  | | | |  |  |  |  | Possible solution to Magnum Springers Trashing Scopes |  | |  |  |  |
Posted: Tue Mar 17, 2015 11:49 am |
|
|
| Ledbetter122 |
| Member |

|
 |
| Joined: 24 Feb 2015 |
| Posts: 30 |
|
|
|
 |
Alright, I just had an Idea
I have gone through 4 scopes already on my Benjamin Titan GP .22, all the scopes were airgun rated, but would not hold up and started losing zero 20-40 shots in. I have a Leapers Bug Buster 3x9-32 coming in tomorrow (with High hopes).
At work we have a ton of scrap "Foam", its specifically made to absorb vibrations from Motor Vehicles, it compresses quite nicely and has some serious gripping qualities to it.
The foam feels "Kinda Jelly", almost like a memory foam, but stiffer.
I was going to put a piece of the foam on the bottom and top of the scope mounts, and put a shim between where the rings are bolted down (to avoid crushing the scope)
I did some research on avoiding scope destruction on springers or Gas Rams in my case, and came up empty.
Any Advices, I was going to do this on the scope I have now (keeps zero until about 15 shots in and then starts to drift) and update. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Mar 17, 2015 12:07 pm |
|
|
| Robw |
| Veteran Member |

|
 |
| Joined: 30 Jan 2013 |
| Posts: 441 |
|
|
|
 |
| The bug buster should take care of your problem. |
|
_________________ Getting in a rush only slows you down.
Reflect Jesus Christ-Not your surroundings. |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Mar 17, 2015 12:11 pm |
|
|
| shawn706 |
| Member |

 |
 |
| Joined: 08 Jun 2013 |
| Posts: 95 |
| Location: Madison County Georgia |
|
|
 |
| Firearm scope. I like the Bushnel Banner. Very bright, not too expensive, and I know it can hold up to the recoil of a 30-06. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Mar 17, 2015 12:22 pm |
|
|
| Robw |
| Veteran Member |

|
 |
| Joined: 30 Jan 2013 |
| Posts: 441 |
|
|
|
 |
Just because it will hold up to centerfire recoil is no indication that it will
survive magnum springer recoil. The springer will produce a two way recoil
and the lenses in most firearm scopes are braced for one way recoil and can
be easily damaged by the two way recoil. |
|
_________________ Getting in a rush only slows you down.
Reflect Jesus Christ-Not your surroundings. |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Mar 17, 2015 12:23 pm |
|
|
| shawn706 |
| Member |

 |
 |
| Joined: 08 Jun 2013 |
| Posts: 95 |
| Location: Madison County Georgia |
|
|
 |
| Robw wrote: |
Just because it will hold up to centerfire recoil is no indication that it will
survive magnum springer recoil. The springer will produce a two way recoil
and the lenses in most firearm scopes are braced for one way recoil and can
be easily damaged by the two way recoil. |
I did not know that. Thanks for heads up. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Mar 17, 2015 12:30 pm |
|
|
| Robw |
| Veteran Member |

|
 |
| Joined: 30 Jan 2013 |
| Posts: 441 |
|
|
|
 |
The Bushnell Elite line will handle magnum springer recoil, but some find the
cost prohibitive. |
|
_________________ Getting in a rush only slows you down.
Reflect Jesus Christ-Not your surroundings. |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Mar 17, 2015 12:40 pm |
|
|
| shawn706 |
| Member |

 |
 |
| Joined: 08 Jun 2013 |
| Posts: 95 |
| Location: Madison County Georgia |
|
|
 |
| I've been satisfied with the stock scopes that have come on the only 2 guns that I have that have optics on them. I doubt either of those would fall in the Magnum class. Both are .177, and 1200 fps, but that's shooting God knows what weight pellet. They do a good number on squirrels which was their intended purpose. If they do go out, I'll likely check out the bug buster mentioned. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Mar 17, 2015 1:41 pm |
|
|
| AirGunEric |
| Site Admin |

 |
 |
| Joined: 20 Jan 2007 |
| Posts: 6931 |
| Location: "Out There" |
|
|
 |
| Virtually all modern, decent quality scopes will hold up behind magnum springers. Note "decent quality" does not necessarily mean a $50.00 no-name Chinese scope or necessarily all scopes at a higher price point. Bushnell, Simmons, Millett all hold up behind springers, Tasco not as much, CenterPoints seem to have become a crap-shoot the last year or two (whereas previously they held up very well), can't speak for Leapers. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Mar 17, 2015 1:53 pm |
|
|
| shawn706 |
| Member |

 |
 |
| Joined: 08 Jun 2013 |
| Posts: 95 |
| Location: Madison County Georgia |
|
|
 |
| Center Point is what is on my Gamo. Of the two I like it the least. Not sure of the brand of the one that came on the Crossman, but I havn't taken the caps off in over a year. It has mil dots, which I've found very usefull. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Mar 17, 2015 2:56 pm |
|
|
| Ledbetter122 |
| Member |

|
 |
| Joined: 24 Feb 2015 |
| Posts: 30 |
|
|
|
 |
| AirGunEric wrote: |
| Virtually all modern, decent quality scopes will hold up behind magnum springers. Note "decent quality" does not necessarily mean a $50.00 no-name Chinese scope or necessarily all scopes at a higher price point. Bushnell, Simmons, Millett all hold up behind springers, Tasco not as much, CenterPoints seem to have become a crap-shoot the last year or two (whereas previously they held up very well), can't speak for Leapers. |
Ill have to say 2 of those 4 scopes that wrecked were Centerpoint 4x16-40 scopes. I will never buy them again, I might have gotten lemons, but in my opinion they are garbage |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Mar 17, 2015 4:16 pm |
|
|
| shawn706 |
| Member |

 |
 |
| Joined: 08 Jun 2013 |
| Posts: 95 |
| Location: Madison County Georgia |
|
|
 |
| I was wrong, the center point is on the Crossman. The gamo has a gamo scope. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Mar 17, 2015 7:39 pm |
|
|
| Mentolio |
| Veteran Member |

|
 |
| Joined: 02 Jun 2013 |
| Posts: 207 |
| Location: Sadly, New Jersey |
|
|
 |
I have two UTGs, both of which have ridden on the back of my one time scope killer Vantage NP (5 times actually, killed 5 scopes: 3 bundled 4x32s, 1 CP 3-9x32 IR, and an Optima 4x32). I didn't start using the UTGs until I changed the stock. In my case, it was the wooden stock that was causing my problems. I would tighten the screws as much as possible, but it would kill the scope, and or loosen the screws in 100 shots or less (even with thread locking compound). When I put the gun in a new composite stock (Nitro Venom Dusk stock), the scope killing abruptly stopped. Turns out the stock lug brace for the wood stock didn't fit snugly in the recess in the stock. The new lug brace for the Venom stock was a far tighter fit in the new stock, and the screws NEVER came loose.
Now, the higher quality UTG scope may have been able to survive on the old set up, but I was unable to risk the 120 dollar scope on the setup that was murdering all my other (admittedly cheap-o) scopes. The new stock and lug brace cost under 40 bucks shipped from Crosman. I would suggest just disassembling your gun and checking how snug the lug brace fits into the stock, and how the round lug under the compression tube fits in the lug brace. If it's sloppy like mine was, concentrate on fixing that. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Mar 17, 2015 8:21 pm |
|
|
| robert w |
| Senior Member |

|
 |
| Joined: 12 Feb 2012 |
| Posts: 574 |
| Location: usa |
|
|
 |
| I got a bsa essential and it has stood over 5000 shots from my diana 54, that's a scope killer.I like the bsa so well I bought 4 more for my other magnum springers.they can be bought new for around $80 |
|
_________________ ,crosman 400,gamo big cat in .22, diana 5g,diana 54 air king, diana 34 in .22 diana 34 in .177, wilrauch hw-55,and a romainian pioner training rifle , and a huge collection of powder burners 35 last count . 1 would think i have a gun store |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Mar 17, 2015 8:28 pm |
|
|
| Robw |
| Veteran Member |

|
 |
| Joined: 30 Jan 2013 |
| Posts: 441 |
|
|
|
 |
| robert w wrote: |
| I got a bsa essential and it has stood over 5000 shots from my diana 54, that's a scope killer.I like the bsa so well I bought 4 more for my other magnum springers.they can be bought new for around $80 |
That makes sense as BSA has made some spring guns known for reeking
havoc on scopes of lesser quality over the decades. |
|
_________________ Getting in a rush only slows you down.
Reflect Jesus Christ-Not your surroundings. |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Wed Mar 18, 2015 6:13 am |
|
|
| Ledbetter122 |
| Member |

|
 |
| Joined: 24 Feb 2015 |
| Posts: 30 |
|
|
|
 |
Alright after I got home from work yesterday I went straight to testing out my foam theory.
With good results after installing the foam, I zeroed the scope and kept shooting, after about 100 shots the scope was still "Dead Zero", before it would only shoot 10-15 shots before losing zero.
Now I dont know jf in the long term this will hold up, but it definitely helped out alot |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|