 |  | | | |  |  |  |  | Phantom Spring Change?? |  | |  |  |  |
Posted: Sun Nov 25, 2007 7:49 pm |
|
|
| 2RCHA |
| Veteran Member |

 |
 |
| Joined: 21 Feb 2007 |
| Posts: 195 |
| Location: The Big Smoke, Ontario |
|
|
 |
Hey there Guy's,,I'm lookin' for some more info on modding my Phantom, from stock the piston was shortened, and that's about it except for a lube tune,,I'm getting 750fps w/ Copperhead Dome's, and I was just wondering if I changed the spring would it make much of a difference?,,I wouldn't mind getting an extra 50fps, I'm happy with it now, but when i'm shooting Skenco's i'm only getting 950fps, and I would really like to bring it up to an even 1000fps,(I get 1000fps using Prometheus pellet's, but at only 9gr., they tend to drift after 40yds).
I have a couple of brand new B4 spring's kicking around, which are the same size as the original stock spring,,Any idea's on this guy's?,,Andy. |
|
_________________ QB78-D w/Fitco 4-16x44CE
2x,XS B4-2a .177/.22 w/Fitco 3-9x40
XS B2-2a .22 w/Simmons 3-9x40
XS B9-1 w/AimPoint CompM2
TAC1 Extreme w/Tasco 3-9x40/Var,. Kit
2240/2289g w/Fitco 3-12x40K-GD
Gamo Recon w/ Fitco 2-7x32k
QB-57Deluxe .22 w/Fitco 2-7x32k |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon Nov 26, 2007 12:53 pm |
|
|
| AirGunEric |
| Site Admin |

 |
 |
| Joined: 20 Jan 2007 |
| Posts: 6931 |
| Location: "Out There" |
|
|
 |
| You can try putting other springs in it- but you may be pretty close to having it maxed out already. The coils will eventually bind depending on the spring/spacing. I don't know what springs are in the B4's- but give it a try and see what happens. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | not B-4 spring.. |  | |  |  |  |
Posted: Wed Dec 26, 2007 6:54 pm |
|
|
| Gunrunner |
| Member |

|
 |
| Joined: 26 Feb 2007 |
| Posts: 51 |
|
|
|
 |
You don't want to do that unless you want your phantom shooting in the low 600, the B-4 spring isn't the same size, the wire on that is only .116 where the phantom is .122 you see the difference.
Also I cut down a new Quest 500 piston.. which has a bigger inside dia. then the phantom piston .. I put a XL spring in it .128 and went through 2 seal in 8 shots.. it burned the seal.. the only think I can think of is that the breech port is to big and the piston is moving to fast and heating up the seal.. mind you I got 3 good shots at 908 untile the seals let go..
Gunrunner  |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | 2RCHA Shoot Charlie Da Tuna an e-mail |  | |  |  |  |
Posted: Wed Dec 26, 2007 11:01 pm |
|
|
| BBGun Bob |
| Veteran Member |

 |
 |
| Joined: 29 Oct 2007 |
| Posts: 474 |
| Location: Michigan |
|
|
 |
I did that with that B-3 AK47 thingy I got.
I told him wire size, length, and number of coils in the original spring within 24 hours he answered me with a recomendation on what spring to use. He also gave me some info on the power plant in the B-3's(its limits) as far as where to draw the line.There is only so much you get out of a given power plant in a air rifle,after that your wasteing time and money.
Go ahead and(e-mail) tell him what you want to do and what you are expecting after your mod. He will answer you as truthful as possible.
He seems to be a pretty up front guy.
Sincerly BBGun Bob
Here's his link
http://www.airguns.citymax.com/page/page/251327.htm |
|
_________________ Air Guns Create Many Questions ! !
Together We Can Answer Them ! ! |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | it does work .. in |  | |  |  |  |
Posted: Thu Dec 27, 2007 10:21 am |
|
|
| Gunrunner |
| Member |

|
 |
| Joined: 26 Feb 2007 |
| Posts: 51 |
|
|
|
 |
I have 2 Quest.. 1 with a B-21 spring in it, wire size .130 and another with the XL spring wire size .128 both have thousands of shots through them, never a problem, still on the same seals.. so as I said in my earlier post I believe it might have something to do with the port size not making enough back pressure.. since there both the same guns and compression chambers just diff. port size. I get all my springs off that site.. great price and fast service.
The b-4 is a gun I have had good luck with modding, shooting right now in the high 700, adding another 3/4 in. sweep to it and as most of them a tack driver.. just a shitty trigger but that will soon change I hope.
Gunrunner
Bob you might want to make the transfer port size smaller on your AK did that to my B-4 smoother shooter and gained 20 fps by doing it ..I pick up brass and aluminum tubing at hobby stores, they have them in all sizes, not sure what size I have in there now just cut off a bit .. 1/8 or so, you don't even have to take the rifle apart, just cock it and you can slide the tube right in.. takes 5 min.. the tube fit right in snug with little crazy glue and it stays put.
Andy has one of my B-4 and its shooting in the mid 800's |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | Phantom Spring Change?? |  | |  |  |  |
Air Gun Home Forum Index » Rifles
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
All times are GMT - 5 Hours
Page 1 of 1
|
|
|
|
|  |  |  | | | |  |  |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|