Air Gun Home :: View topic - what are the marauder 22. factory settings i just got it

soucy678 · Member

does anyone know if i can fill it to 3000 psi ? and how fast its set to shoot at?

Mark5043 · Silver Status Member

Here you go...this will give you a run down on settings,as well as some tips on how to establish your baseline,or factory setup:)

http://www.crosman.com/blogs/croswords/?p=173

soucy678 · Member

Thanks i saw that already but it has no mention of 22. but thanks

sniper · Silver Status Member

if this helps. mine peaks at 2150 psi-1650 +- 20 fps.
stock i get 27 shots per fill. that's kodiaks around 785 fps
and crow mags at 825 ish.

i opened the velocity adjuster screw out 1.5 turns and
gained 15-20 fps but lost around 4 shots per fill at the same
2200 fill pressure. i've done nothing else to it
nor is my tank big enough to fill to 3000 psi.
i like it where it is.

mine is in .22 and i only shoot heavy pellets.

Jaxom · Senior Member

Sniper given your experince with heavier pellets what's the heaviest you'd recommend then?

rsterne · Moderator

For a gun of that power range I wouldn't use anything heavier than a Kodiak.... and an 18 gr. JSB Exact Heavy would probably be more efficient.... In addition, I doubt if any pellets heavier than a Kodiak will fit in the magazine.... I believe the maximum length is 8mm....

Bob

sniper · Silver Status Member

bob is very correct. as usual. Rolling Eyes

18 grain is the optimum. kodiaks rule! (21.1)

i get around 700-710 fps with 28.4 eun jins
but they drop off fast at longer ranges.

mine eats crow mags as a regular diet (18.2)

yes, ej's and predators can only go single shot.