 |  | | | |  |  |  |  | HW breech seal turns into putty |  | |  |  |  |
Posted: Tue May 04, 2010 4:54 pm |
|
|
| dobiman |
| Veteran Member |

|
 |
| Joined: 30 Mar 2010 |
| Posts: 167 |
| Location: Gil's Isle, USA |
|
|
 |
I recently had to do something about my HW50 synthetic breech seal. It was smashed flat from storage or maybe time or something else. I used a rust preventive oil product that claimed to be safe on plastics and rubber, in it's promotion, they had a television set immersed in the oil while it was operating. Well, upon removing the breech seal, it broke apart like old putty. I was hoping to turn it over to get more use out of it.
I know this wouldn't have happened if I had used recommended silicone oils instead.
So, it was time to buy another breech seal. Turns out Air Rifle Headquarters is still in operation selling parts. They have the seals for HWs as well as the piston head seals which are also necessary for long term use of airguns. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue May 04, 2010 5:28 pm |
|
|
| fritz |
| Silver Status Member |

 |
 |
| Joined: 25 Nov 2008 |
| Posts: 2444 |
| Location: New Jersey- outside of Philadelphia |
|
|
 |
I hate to say it...
Someone told you so. |
|
_________________ "I never set out to be wierd, it was always everyone else who called me it" -Frank Zappa
Speed is impressive, accuracy is deadly.
It's not that I'm not a people person, it's just that I'm not a stupid people person. |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Wed May 05, 2010 2:35 am |
|
|
| broommaster2000 |
| Moderator |

 |
 |
| Joined: 10 Mar 2007 |
| Posts: 5714 |
| Location: City of Groningen, Groningen, The Netherlands |
|
|
 |
| Aw well, it's not like those seals cost the world. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Wed May 05, 2010 3:12 am |
|
|
| dobiman |
| Veteran Member |

|
 |
| Joined: 30 Mar 2010 |
| Posts: 167 |
| Location: Gil's Isle, USA |
|
|
 |
You're right Broom, but for folks looking to get the breech and piston seals, some places have minimum orders or charge a lot for shipping the little things that could very well be sent in a padded envelope for a couple of bucks. I bought several items from ARH to make it worth the postage.
The HW breech seals are on sale right now for $3.95 if anyone is interested. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Wed May 05, 2010 3:21 am |
|
|
| broommaster2000 |
| Moderator |

 |
 |
| Joined: 10 Mar 2007 |
| Posts: 5714 |
| Location: City of Groningen, Groningen, The Netherlands |
|
|
 |
| dobiman wrote: |
You're right Broom, but for folks looking to get the breech and piston seals, some places have minimum orders or charge a lot for shipping the little things that could very well be sent in a padded envelope for a couple of bucks. I bought several items from ARH to make it worth the postage.
The HW breech seals are on sale right now for $3.95 if anyone is interested. |
Dang, yeah you're right. For my BSA, I needed a new breech seal to, so I would order one from QSA (in the NL) but after a phonecall they said they were out and it would be quicker if they'd send me a Weihrauch one, and then would shorten it using sanding paper.
I got two for the price of one, via envelope, and I'm glad I ordered two becauuse I sanded the first one down a bit to much. Works like a charm though.
You might be able to work with anything synthetic as long as it fits and is bendy enough. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Thu May 06, 2010 2:10 pm |
|
|
| dobiman |
| Veteran Member |

|
 |
| Joined: 30 Mar 2010 |
| Posts: 167 |
| Location: Gil's Isle, USA |
|
|
 |
| Hey Broom, you got me thinking about making my own breech seals. Has anybody tried using PVC tubing or hose? They have it in 3/8"I.D.x 5/8"O.D. which may work. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Thu May 06, 2010 5:16 pm |
|
|
| donec |
| Senior Member |

|
 |
| Joined: 19 Dec 2009 |
| Posts: 836 |
| Location: central Texas Pflugerville area |
|
|
 |
| dobiman wrote: |
| Hey Broom, you got me thinking about making my own breech seals. Has anybody tried using PVC tubing or hose? They have it in 3/8"I.D.x 5/8"O.D. which may work. |
I don't know but wouldn't PVC tubing be too hard and rigid for a seal? |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Thu May 06, 2010 9:43 pm |
|
|
| dobiman |
| Veteran Member |

|
 |
| Joined: 30 Mar 2010 |
| Posts: 167 |
| Location: Gil's Isle, USA |
|
|
 |
| donec wrote: |
| dobiman wrote: |
| Hey Broom, you got me thinking about making my own breech seals. Has anybody tried using PVC tubing or hose? They have it in 3/8"I.D.x 5/8"O.D. which may work. |
I don't know but wouldn't PVC tubing be too hard and rigid for a seal? |
I think you may be referring to PVC pipes which is hard. They have those flexible PVC or vinyl tubing for aquarium pumps and other uses. Cutting it precisely flat at the ends and turning it down to the correct diameter may be done by sticking a dowel through it and spinning it on a drill or lathe.Maybe it'll work, maybe not. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sun May 09, 2010 4:07 pm |
|
|
| dobiman |
| Veteran Member |

|
 |
| Joined: 30 Mar 2010 |
| Posts: 167 |
| Location: Gil's Isle, USA |
|
|
 |
| Got my new breech seals in yesterday. Looks like they had the same idea of using some kind of vinyl material. It is made of a transparent green stuff (looks like jelly candy). Oops almost ate it. Hahaha. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sun May 09, 2010 5:12 pm |
|
|
| broommaster2000 |
| Moderator |

 |
 |
| Joined: 10 Mar 2007 |
| Posts: 5714 |
| Location: City of Groningen, Groningen, The Netherlands |
|
|
 |
The one in my BSA is reasonably rigid too. Kind of almost hard but just not to give it a little bendy-ness.  |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | HW breech seal turns into putty |  | |  |  |  |
Air Gun Home Forum Index » Rifles
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
All times are GMT - 5 Hours
Page 1 of 1
|
|
|
|
|  |  |  | | | |  |  |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|