 |  | | | |  |  |  |  | Marader Stock Sealant |  | |  |  |  |
Posted: Sun Feb 14, 2010 8:57 pm |
|
|
| shamu25 |
| New Member |

|
 |
| Joined: 14 Feb 2010 |
| Posts: 4 |
| Location: Grand Rapids, MI |
|
|
 |
| Just bought a new Mrod and wondering what to put on the stock to seal, add a polish and make the checkering stand out. It is a beautiful piece of wood but seems a bit dull and dry and needs to be spruced up a bit. Thanks |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sun Feb 14, 2010 9:20 pm |
|
|
| fritz |
| Silver Status Member |

 |
 |
| Joined: 25 Nov 2008 |
| Posts: 2444 |
| Location: New Jersey- outside of Philadelphia |
|
|
 |
|
_________________ "I never set out to be wierd, it was always everyone else who called me it" -Frank Zappa
Speed is impressive, accuracy is deadly.
It's not that I'm not a people person, it's just that I'm not a stupid people person. |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | Re: Marader Stock Sealant |  | |  |  |  |
Posted: Sat Feb 27, 2010 7:11 pm |
|
|
| sniper |
| Silver Status Member |

 |
 |
| Joined: 28 Nov 2008 |
| Posts: 3752 |
| Location: Star, Idaho |
|
|
 |
| shamu25 wrote: |
| Just bought a new Mrod and wondering what to put on the stock to seal, add a polish and make the checkering stand out. It is a beautiful piece of wood but seems a bit dull and dry and needs to be spruced up a bit. Thanks |
i have an mrod. bitchen gun eh?
i've done nothing to the stock yet, however
slavia likes to use paste wax.
if memory serves my right he does a rub down (very light)
with super fine steel wool and rubbing compound
then applies 2 coats of wax. same as what you would do
to an auto paint job.
his method is on my to-do list.
it's not that the finish is dull it is just finished with a very low
sheen (gloss) clear. a little more dull than satin which i like.
or, you can give it a very light sand with 400 grit
and shoot a coat of oil based polyurethane on it.
if you do-DO NOT OVER SAND THE HIGH SPOTS!!
for the checkering go to the paint store and buy a fine
grit "sanding sponge". |
|
_________________ I believe in gun control,
If there's a gun around I
want to be controlling it....... |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sun Feb 28, 2010 12:02 am |
|
|
| AirGunEric |
| Site Admin |

 |
 |
| Joined: 20 Jan 2007 |
| Posts: 6931 |
| Location: "Out There" |
|
|
 |
| Crosman actually makes those stocks in-house. They told me what they were, now I can't remember, Beech or something... |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sun Feb 28, 2010 10:19 am |
|
|
| Slavia |
| Moderator |

 |
 |
| Joined: 31 Mar 2008 |
| Posts: 4382 |
| Location: Waseca, Minnesota, USA |
|
|
 |
| Quote: |
slavia likes to use paste wax.
if memory serves my right he does a rub down (very light)
with super fine steel wool and rubbing compound
then applies 2 coats of wax. same as what you would do
to an auto paint job. |
Quite correct. There are also a couple of products you might consider - Birchwood Casey Tru-Oil or Min-Wax Wipe On Poly. Both go on with a clean cloth, applying just enough to make the surface look "wet." Then you rub them out and use paste wax. The poly is clear; the Tru-Oil imparts a slight amber hue. My Slavia 631 was, as you described, "dull and dry." Three coats of Tru-Oil plus the paste wax fixed it right up.
Tru-Oil is of the same family of finishes as tung oil and boiled linseed oil, in that they react with oxygen to cure. Tru-Oil has been heat treated to make it cure faster - you can get a couple of coats on in a day. Tung oil or boiled linseed oil can take several days for a single coat. Poly is a resin in a volatile vehicle, and that vehicle evaporates pretty quickly (leaving the resin behind).
You don't want finish to pool in the grooves of the checkering, so I would pat it out with a cloth. Don't wipe sideways, as the sharp checkering will tear out cloth fibers and embed them in the finish. Likewise don't use a paper towel, since the fibers are very short and detach easily. An old toothbrush will keep the paste wax from building up in the checkering. |
|
_________________
¡Listo! ¡Apunte! ¡Fuego! |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | Stock finish |  | |  |  |  |
Posted: Sun Feb 28, 2010 12:36 pm |
|
|
| shamu25 |
| New Member |

|
 |
| Joined: 14 Feb 2010 |
| Posts: 4 |
| Location: Grand Rapids, MI |
|
|
 |
Thanks guys...this is exactly what I have been looking for
Blessings
Shamu |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | Re: Marader Stock Sealant |  | |  |  |  |
Posted: Sun Feb 28, 2010 6:17 pm |
|
|
| donec |
| Senior Member |

|
 |
| Joined: 19 Dec 2009 |
| Posts: 836 |
| Location: central Texas Pflugerville area |
|
|
 |
| sniper wrote: |
| shoot a coat of oil based polyurethane on it. |
What do you mean shoot a coat? Do you mean spray? If so what do you use to spray with, is it like car paint that needs special pressure or just any sprayer will do like an airbrush? |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sun Feb 28, 2010 7:14 pm |
|
|
| sniper |
| Silver Status Member |

 |
 |
| Joined: 28 Nov 2008 |
| Posts: 3752 |
| Location: Star, Idaho |
|
|
 |
yes spray. slang painters term. i use ZAR fast dry in a spray can.
i can run liquid through my gravity fed conventional gun
(with my air compressor) cut with a little naptha
or either of my commercial grade graco airless sprayers
but that would be for a big job (cabinets etc) for a stock a spray can is all you need.
they're around $8/can. 1 can does 2 stocks @ 6-8 coats per stock. |
|
_________________ I believe in gun control,
If there's a gun around I
want to be controlling it....... |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | Marader Stock Sealant |  | |  |  |  |
Air Gun Home Forum Index » Airgun Smithing
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
All times are GMT - 5 Hours
Page 1 of 1
|
|
|
|
|  |  |  | | | |  |  |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|