 |  | | | |  | |  |  | CO2 Bottle Dimensions ? |  | |  |  | |
 Posted: Thu Jan 29, 2009 5:04 pm |
 |
|
| rsterne |
| Moderator |
 |
|
| Joined: 15 Jan 2008 |
| Posts: 2998 |
| Location: Coalmont, BC |
|
|
|
Can anyone give me the dimensions (diameter, length, weight) of commonly available CO2 bottles- 3.5 oz; 9 oz; 12 oz; 16 oz; 20 oz; 24 oz; others that will fit on a gun?.... just the bottle without the valve....
I also need to understand what the standard valve / attachment sizes are (is there one standard?) and how they work.... do they have an internal valve that allows the bottle to be detached, or must they be emptied completely before removal?....
While we're at it, does anyone make a bulk fill adapter (facing forward under the barrel) for the 22XX series that drops the valve down far enough for it to clear the underside of the barrel?.... 
Bob |
|
_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count! |
|
|
|
|
|
| |  |  | | | |  |  |
| | | | | | | | | | | | | | |
| Posted: Thu Jan 29, 2009 11:42 pm |
|
|
| AirGunEric |
| Site Admin |
 |
|
| Joined: 20 Jan 2007 |
| Posts: 6930 |
| Location: "Out There" |
|
|
|
I believe it was that guy in Hawaii who made the bulk adapter like you are asking about (and for some reason his name eludes me at the moment), but he was always a bit hard to get ahold of.
As for the paintball/Co2 tanks and their valves- they are a 'one-piece' type setup- if you remove it from the bottle it had better be empty. The fitting on them is called an 'ASA' fitting (or just 'paintball' fitting to alot of people) and it is basically a shrader/pin-type valve.
Weights without the valves- does anyone remove the valves? |
|
|
|
|
|
|
| | | | | | | | |
| | | | | | | | | | | | | | |
| Posted: Fri Jan 30, 2009 12:32 pm |
|
|
| rsterne |
| Moderator |
|
|
| Joined: 15 Jan 2008 |
| Posts: 2998 |
| Location: Coalmont, BC |
|
|
|
OK so paintball (CO2 bulk) tanks have basically an integral valve (see what I know about it!).... 
I really need the dimensions (diameter, length including valve, and weight including valve [empty or full, please specify]).... 
Bob |
|
_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count! |
|
|
|
|
|
| | | | | | | | |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|
