Click Here for AirGunHome.com Main Page
Argentina Australia Belgium Canada Chile Denmark France Germany Greece India
Italy Mexico New Zealand Netherlands Norway Russian Federation South Africa Spain Turkey United Kingdom United States
AirGunHome.com: THE Worldwide Airgun Forum


AirGunSeals.com Main Page Link
Air Gun Home Forum Index Register FAQ Memberlist Search

Air Gun Home Forum Index » Pellets/Ammo » Pellet question Goto page Previous  1, 2
Post new topic  Reply to topic View previous topic :: View next topic 
 
PostPosted: Fri Oct 24, 2008 1:59 pm Reply with quote
Storck-42
Member
Member
Joined: 25 Sep 2008
Posts: 45
Location: California
2RCHA wrote:
Different Head Designs:

Nearly all modern pellets today take on the Diabolo shape - an "hourglass" design that was named after a spool shaped object used in the ancient game of Diabolo. The thin flaring skirt of the pellet engages the rifling of the barrel and acts as an air seal for best efficiency. A few pellets still use the cylindrical style with straight flat walls and a small ring at the bottom to engage the rifling. These pellet designs were most common with the Sheridan brand of .20 caliber pellets, and are not as prevalent today due to their generally poor flight characteristics.

The only difference between Diabolo designs is that some have smooth skirts ("glatt") while others have ribbed skirts ("gereffelt"). Both styles shoot equally as well, and Beeman has both models available.

The biggest difference in pellets comes in the head design. Pellets are generally classified according to their head shape since this feature has the most profound effect on performance.

Four Basic Pellet Types:

1. Wadcutter -- Pellets with a sharp outer edge; usually with a flat head that was designed to cut a perfectly round hole in a paper target to aid scoring. This is the style that Olympic competitors and other 10 meter shooters use. Many hunters also prefer to use a wadcutter in the field because of their excellent impact and limited penetration. The Beeman H&N Match pellet is an excellent example of this style.

2. Pointed -- Designed for maximum penetration and long range shooting. The best selling models are the Beeman Silver Arrow and the Beeman Silver Sting. These models are frequently imitated by others, but none has come close to the performance of the Beeman brands. Note: due to the head design, pointed pellets generally do not work well in the repeating mode of some airguns.

3. Round Nose -- Great for all-around shooting. They have low wind resistance and flat trajectory. The Beeman Laser pellet is lightweight and gives hyper velocities, while a heavier pellet, such as the Kodiak or Ram Point, harnesses the energy of high powered airguns for more consistent shooting.

4. Hollow Point -- First introduced to airgun shooters as the Silver Bear. We pioneered the hollow point concept to allow for the maximum impact from all airguns. This style has a direct relationship with velocity - the higher the velocity the more expansion will occur on impact. This is especially true with the Crow Magnum which can nearly double in size when shot with a magnum airgun.


You wouldn't happen to work for Beeman, would you? Mr. Green TFG Uzi Shooting
View user's profile Send private message
Good Information... 
PostPosted: Fri Oct 24, 2008 11:10 pm Reply with quote
cliffspot
Veteran Member
Veteran Member
Joined: 15 Jun 2007
Posts: 132
Location: Miami via Hawaii
And smart for using it off the Beeman site. There is a lot of useful information there. Saved you a lot of typing for sure! But some of the information is old. As we know know, round nose pellets are better for long range shooting....usually. But there is always the "favorite" bullet for each gun. I have an R1 in 177 that LOVES Cro Mags and that is "not a good Long range pellet". The reason pointed pellets don't work well in repeating systems has to do with pellet length, too long for the magazine or feed mechanism.

_________________
There are no accidents; only ignorance, mechanical failure, and acts of God! I have loaded over 6 million rounds in the last 5 years and STILL have not seen it all!
View user's profile Send private message
 
PostPosted: Mon Oct 27, 2008 12:36 am Reply with quote
Jaxom
Senior Member
Senior Member
Joined: 06 Aug 2008
Posts: 927
RE adding bb's to hollow points.

Thill bobber company makes premioum lead bb's down to 1/64th of an oz size. These could easily fit inside a .177 hollow point with room to spare. Could do some experimenting with them.
View user's profile Send private message
Pellet question 
  Air Gun Home Forum Index » Pellets/Ammo
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 5 Hours  
Page 2 of 2  
Goto page Previous  1, 2
  
  
 Post new topic  Reply to topic  

Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.


Click Here for AirGunHome.com Main Page


Powered by phpBB © 2001-2004 phpBB Group
Partial Styling Supplied by Vjacheslav Trushkin Themes Database.