Click Here for AirGunHome.com Main Page
Argentina Australia Belgium Canada Chile Denmark France Germany Greece India
Italy Mexico New Zealand Netherlands Norway Russian Federation South Africa Spain Turkey United Kingdom United States
AirGunHome.com: THE Worldwide Airgun Forum


AirGunSeals.com Main Page Link
Air Gun Home Forum Index Register FAQ Memberlist Search

Air Gun Home Forum Index » Airgun Smithing » Evanix AR6 technical
Post new topic  Reply to topic View previous topic :: View next topic 
Evanix AR6 technical 
PostPosted: Sun Mar 13, 2011 3:18 pm Reply with quote
cissp22
Member
Member
Joined: 05 May 2008
Posts: 63
Hi every one ,

i wonder how this Evanix ar6 regulator Opens ! its unbelievable that there is no twist or anything i can open this Airtube tip !!!!!!!!!!!

experts plz help,

View user's profile Send private message Yahoo Messenger
 
PostPosted: Sun Mar 13, 2011 3:45 pm Reply with quote
rsterne
Moderator
Moderator
Joined: 15 Jan 2008
Posts: 2997
Location: Coalmont, BC
If that is the cap on the end of the airtube.... and it appears to be as it looks like the fill probe goes in there.... then wouldn't the regulator be at the other end of the air reservoir?....

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal:
.177 Diana 34, 1750 CO2 Carbine, .177 Uber-Pumper, .22 Uber-Carbine, .25 Discovery, 22XX PCP 8-shot Carbine, 2260 PCP Rifle (50 FPE), Hayabusa PCP, .22 B-26
View user's profile Send private message Visit poster's website
 
PostPosted: Sun Mar 13, 2011 4:26 pm Reply with quote
cissp22
Member
Member
Joined: 05 May 2008
Posts: 63
hi rsterne,

no its not ,here is the end of reservoir where hammer stikes ,

my hand and where u see the U shape is where the hammer strikes .

that white plastic inside holds the air inside the tube and when i push the hammer it opens the valve ,

i wonder how this part opens !!!!
View user's profile Send private message Yahoo Messenger
 
PostPosted: Sun Mar 13, 2011 4:43 pm Reply with quote
rsterne
Moderator
Moderator
Joined: 15 Jan 2008
Posts: 2997
Location: Coalmont, BC
ahhhhhhh.... sorry.... so you are holding the valve.... Are you sure there is a regulator?....

I'm guessing here.... but it looks like the air from the reservoir comes in through the hole(s) in the side of the valve (where you can see the white plastic).... then up through the valve seat.... then turns and comes out the transfer port (brass hole).... I assume the O-ring sits in the groove just to the left of the hole?....

It you look at the end of the valve on the right.... is it open (ie can the white plastic valve come out through there).... or is it a closed cup?.... If it's closed, then it must come apart about where the O-ring groove is.... or the right end is removable....

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal:
.177 Diana 34, 1750 CO2 Carbine, .177 Uber-Pumper, .22 Uber-Carbine, .25 Discovery, 22XX PCP 8-shot Carbine, 2260 PCP Rifle (50 FPE), Hayabusa PCP, .22 B-26
View user's profile Send private message Visit poster's website
 
PostPosted: Sun Mar 13, 2011 4:49 pm Reply with quote
rsterne
Moderator
Moderator
Joined: 15 Jan 2008
Posts: 2997
Location: Coalmont, BC
Found a diagram.... as I thought, it comes apart at the O-ring groove....

http://img12.imagevenue.com/img.php?image=47384_3_122_801lo.jpg#

Unfortunately it doesn't show how.... but I assume threads.... That is a simple valve, not a regulator....

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal:
.177 Diana 34, 1750 CO2 Carbine, .177 Uber-Pumper, .22 Uber-Carbine, .25 Discovery, 22XX PCP 8-shot Carbine, 2260 PCP Rifle (50 FPE), Hayabusa PCP, .22 B-26
View user's profile Send private message Visit poster's website
 
PostPosted: Sun Mar 13, 2011 6:45 pm Reply with quote
cissp22
Member
Member
Joined: 05 May 2008
Posts: 63
thanks alot ,

yea it opened from the Oring groove Smile


Thanks rsterne ,

have u ever tired to tune this rifle for more FPE ? like more strike on hammer/heavier spring ?
View user's profile Send private message Yahoo Messenger
 
PostPosted: Mon Mar 14, 2011 1:17 am Reply with quote
kanyon
Silver Status Member
Silver Status Member
Joined: 09 Aug 2008
Posts: 1582
Location: New Zealand
Hi...
thats is the valve...the AR6 is unrequlated..
I never took my valve apart..But I think the
rear section with the slot for the hammer un-screws..
I remember reading it somewhere.

_________________
Career Infinity PCP .22
Webley Patriot .25
Hatsan mod 75 .22
Hatsan mod 99 .177 (Quattro & SAS)
Kral underlever .177


.............................................


.
View user's profile Send private message MSN Messenger
Evanix AR6 technical 
  Air Gun Home Forum Index » Airgun Smithing
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 5 Hours  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  

Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.


Click Here for AirGunHome.com Main Page


Powered by phpBB © 2001-2004 phpBB Group
Partial Styling Supplied by Vjacheslav Trushkin Themes Database.