Click Here for AirGunHome.com Main Page
Argentina Australia Belgium Canada Chile Denmark France Germany Greece India
Italy Mexico New Zealand Netherlands Norway Russian Federation South Africa Spain Turkey United Kingdom United States
AirGunHome.com: THE Worldwide Airgun Forum


AirGunSeals.com Main Page Link
Air Gun Home Forum Index Register FAQ Memberlist Search

Air Gun Home Forum Index » Airgun Smithing » power adjuster for 2240 Goto page 1, 2  Next
Post new topic  Reply to topic View previous topic :: View next topic 
power adjuster for 2240 
PostPosted: Fri Feb 12, 2010 10:20 am Reply with quote
steveR56
Member
Member
Joined: 22 Jun 2009
Posts: 51
Location: Usa,Ma.
have started modding 2240 -14" barrel,2289 spring,steel reciever,trigger kit- I am trying to find power adjuster( crossman is out) any links to suppliers?
This and the valve mod should get me there. Also adding leapers red/ green dot sight- has small dot and variable light intensity. Thanks for any help on adjuster.
also have another coming from Mac1 who"s work on my Disco was amazing. Will compare and contrast the two when possible
View user's profile Send private message
 
PostPosted: Fri Feb 12, 2010 3:42 pm Reply with quote
T191032
Veteran Member
Veteran Member
Joined: 30 Dec 2009
Posts: 100
Location: VA
Might try over on the Crosman Green Forum - look for Charles Mellon on the main page or in the Crosman Classified section.

http://www.network54.com/Index/12861

Also, over on Airgun Artisans

http://airgunartisans.com/AAPowerMods.htm
View user's profile Send private message
 
PostPosted: Sat Feb 13, 2010 5:30 pm Reply with quote
kanyon
Silver Status Member
Silver Status Member
Joined: 09 Aug 2008
Posts: 1582
Location: New Zealand
http://www.airgunsmith.com
View user's profile Send private message MSN Messenger
 
PostPosted: Fri Feb 26, 2010 9:32 pm Reply with quote
packrat
Senior Member
Senior Member
Joined: 16 Nov 2009
Posts: 882
Location: Out in the woods...Ellabell, GA.
I'm a little late here, but what valve are you gonna get?? Made up your mind yet?? AND,,FWIW,,get an adjuster that allows you to change the spring without having to dis-assemble rear of the gun,,,SO much easier Smile

_________________
HEY !! This getting old thing is NOT for sissies...
View user's profile Send private message Visit poster's website
which valve 
PostPosted: Fri Feb 26, 2010 10:02 pm Reply with quote
steveR56
Member
Member
Joined: 22 Jun 2009
Posts: 51
Location: Usa,Ma.
I did the valve mod thats in the green forum- but have since gotten a "Boss Valve" so I have both to compare, also have a chrony coming to check all setups. My next change will be to add a Disco tube and valve to this rig. I plan to call it "Frankenstein" as unlike others, I'm keeping the Tube full length for a full shot count with an 18" barrel( 4" shorter than the tube). If I want to quiet it down, will have to add RJ riser and 5-6 " compensator, or can leave as is and make lots of noise LOL. Have seen plenty done with tube cut back and re-machined to look more like a pistol, but I'm starting large and working back- wanted to do PCP as I already have a Disco and scuba tank. just can't help playing with the 2240 platform



The one at top is what I will end up with
http://www.mountainaircustomairguns.com/our_guns.htm
View user's profile Send private message
 
PostPosted: Sun Feb 28, 2010 12:54 am Reply with quote
packrat
Senior Member
Senior Member
Joined: 16 Nov 2009
Posts: 882
Location: Out in the woods...Ellabell, GA.
I have a Boss Valve in my 2240..it's gooood stuff. If ya want "quietness" let me tell ya --the TKO 6.5 inch StageV is awesome..I put one on my MA2250B and it honestly is "mouse fart quiet"
http://www.tko22.com/

_________________
HEY !! This getting old thing is NOT for sissies...
View user's profile Send private message Visit poster's website
Boss valve 
PostPosted: Sun Feb 28, 2010 4:23 am Reply with quote
steveR56
Member
Member
Joined: 22 Jun 2009
Posts: 51
Location: Usa,Ma.
Have you chronied your Boss setup? I also have a Mac1 with an !8" barrel and this 16" with Boss is getting 22 good shots as compared to 38 with the Mac 1, but alot stronger. Have Chrony coming Tues and will compare the two- both also have adjusters. Disco tube coming Wed.- that ones going to be fun. Contacted RJ industries about riser, so I can add TKO but haven't heard back. have 6 1/2 " Tko on my Disco and only hear the hammer spring when shooting Great product !!!
View user's profile Send private message
 
PostPosted: Sun Feb 28, 2010 9:33 am Reply with quote
packrat
Senior Member
Senior Member
Joined: 16 Nov 2009
Posts: 882
Location: Out in the woods...Ellabell, GA.
With14.3 CR hollow points, 65 degrees B&A valve and 10"barrel, mine will shoot 26 shots @ over 500fps- high shot of 544.26. Average for 26 shots was 528.54 fps. Paused for 2 minutes between shot#16-#17. Power adjuster all the way IN. When I got it to that point, I quit trying, as I am very happy with results.. with power adjuster 5 turns out I can go plunking with 40-42 shots (depending on cartridge weight) all above the "up to 460fps that's advertised" Smile Smile
If the "green" valve instructions are from "biohazard", you'll find that valve "very" much like the B&A valve (internally)..I've bought several valves and compared "innards" , cause I wanted to know!! I build them myself now, as I have learned from reading posted articles, and measured dimensions of said purchased valves. Mr. Green Mr. Green Mr. Green

_________________
HEY !! This getting old thing is NOT for sissies...
View user's profile Send private message Visit poster's website
 
PostPosted: Sun Feb 28, 2010 12:20 pm Reply with quote
steveR56
Member
Member
Joined: 22 Jun 2009
Posts: 51
Location: Usa,Ma.
Are you using stock hammer spring? have that plus one for 2289 will play around with those- also have 16" barrel on mine- so will compare to your figures once chrony arrives- also need warmer weather- its been high 30's here in ma. not good on co2- but still getting 22 good once from Boss valve and stock spring
View user's profile Send private message
 
PostPosted: Sun Feb 28, 2010 12:22 pm Reply with quote
rsterne
Moderator
Moderator
Joined: 15 Jan 2008
Posts: 2998
Location: Coalmont, BC
In my experience, changing to a heavier hammer spring in CO2 just wastes even more gas.... fewer shots and more noise.... Rolling Eyes

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count!
View user's profile Send private message
Re: Boss valve 
PostPosted: Mon Mar 01, 2010 10:15 pm Reply with quote
Mark5043
Silver Status Member
Silver Status Member
Joined: 12 Apr 2009
Posts: 1379
steveR56 wrote:
Have you chronied your Boss setup? I also have a Mac1 with an !8" barrel and this 16" with Boss is getting 22 good shots as compared to 38 with the Mac 1, but alot stronger. Have Chrony coming Tues and will compare the two-
That sounds great.Looking to build up a 2240,so the info would be helpful in my decision making...... Mr. Green
View user's profile Send private message
"Frankenstein" 
PostPosted: Tue Mar 02, 2010 11:18 am Reply with quote
steveR56
Member
Member
Joined: 22 Jun 2009
Posts: 51
Location: Usa,Ma.
Have decided to take my Mac1 2240 w/18" barrel and change from co2 to PCP-have got a stock disco tube( which will look retarded on 18" barrel along with all related disco pts(valve a$$., fill a$$. valve screws,gauge a$$., etc.Except forgot to order f*** gauge valve(that fits in the tube that gauge screws into) Drilled and tapped forward hole on tube for 6-32 slot screw for my steel breech(do away with that evil 4-48 allen. am trying to get a riser breech from RJ so I can quiet the beast down(Tko) will also help make setup less out of sorts (18" barrel with 6 1/2 " brake as opposed to 24" tube) If not will get 24"barrel- ending up with 2240 disco pistol- later will shave down tube and overall length to make more like a pistol. (cut tube to 18") Also trigger tune, power adjuster, red dot scope already on this one. Parts for disco mod run ~100.00, so one can have disco pistol basic for that,plus 2240, plus steel breech. It's ALIVE!!!!
View user's profile Send private message
 
PostPosted: Thu Mar 04, 2010 5:46 pm Reply with quote
ausher
Member
Member
Joined: 28 Feb 2010
Posts: 96
Location: SWMO U.S.A.
those power adjusters look real easy to make. could i just drill and tap the end cap and screw a bolt through it to apply more pressure on the spring. is the stock spring good enough to do this with or should i use a heavier/longer spring? or a lighter spring? im assuming more spring pressure on the hammer=more power...
View user's profile Send private message
power adjuster for 2240 
PostPosted: Thu Mar 04, 2010 7:34 pm Reply with quote
steveR56
Member
Member
Joined: 22 Jun 2009
Posts: 51
Location: Usa,Ma.
You can do exactly what you mentioned(drill & tap with bolt-' WOULD SUGGEST CAPPED ALLEN FOR ADJUSTMENT- most adjusters have a delrin guide that the adjuster pushes on heavier spring will let more gas through,so less shot count and more velocity- if you mod the valve or go with boss valve, you can go with a lighter spring- the adjuster just gives you the ability to fine tune, but its all a balance between better/more flow through the valve; the most gain can be gotten in velocity by having a 16-18" barrel, anything shorter and the co2 doesn't have time to expand fully from liquid to gas
http://www.pyramydair.com/blog/2007/07/how-barrel-length-affects-velocity-in.html
http://airgunhome.com/agforum/viewtopic.php?t=2702
http://www.airgununiverse.net/22xxvalve.html
View user's profile Send private message
 
PostPosted: Thu Mar 04, 2010 7:53 pm Reply with quote
ausher
Member
Member
Joined: 28 Feb 2010
Posts: 96
Location: SWMO U.S.A.
i plan on ordering one of them 2300kt off the crossman site with a 14" barrel. will a 14" barrel do the trick so the co2 to expand fully? would modding the stock valve be just as good as a boss valve or would getting a boss valve be the best way to go. i plan on getting a bronze bushing to use as a guide for the adjuster to push against(already got it all figured out in my head lol).
View user's profile Send private message
power adjuster for 2240 
  Air Gun Home Forum Index » Airgun Smithing
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 5 Hours  
Page 1 of 2  
Goto page 1, 2  Next
  
  
 Post new topic  Reply to topic  

Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.


Click Here for AirGunHome.com Main Page


Powered by phpBB © 2001-2004 phpBB Group
Partial Styling Supplied by Vjacheslav Trushkin Themes Database.