Click Here for AirGunHome.com Main Page
Argentina Australia Belgium Canada Chile Denmark France Germany Greece India
Italy Mexico New Zealand Netherlands Norway Russian Federation South Africa Spain Turkey United Kingdom United States
AirGunHome.com: THE Worldwide Airgun Forum


AirGunSeals.com Main Page Link
Air Gun Home Forum Index Register FAQ Memberlist Search

Air Gun Home Forum Index » Airgun Smithing » 2240 Seal
Post new topic  Reply to topic View previous topic :: View next topic 
2240 Seal 
PostPosted: Fri Feb 05, 2010 7:28 pm Reply with quote
Slavia
Moderator
Moderator
Joined: 31 Mar 2008
Posts: 4382
Location: Waseca, Minnesota, USA
Hey, did you guys know you can make a 2240 exhaust seal out of the neoprene washer from a sheet metal nail?

Thickness was good, I.D. was good. I spun the washer on a screw and ground/beveled the O.D. (with a Dremel) by about 1/32" so it would fit in the brass cup. Dug out the old seal with a pin, and teased the new one into place with some silicone spray.

It has about 100 rounds on it without problems. Maybe not perfect, but it will buy time until I can get the real thing.

Sorry, no photos. The camera is in Nevada this week.

_________________
¡Listo! ¡Apunte! ¡Fuego!
View user's profile Send private message
 
PostPosted: Sat Feb 06, 2010 12:09 am Reply with quote
AirGunEric
Site Admin
Site Admin
Joined: 20 Jan 2007
Posts: 6931
Location: "Out There"
You cheap ba$tard!

New seals are like $2.00 from Crosman. I can't believe you spent 1/2 hour carving one out yourself! Mr. Green Very Happy

NBL...

Camera's in Nevada? Is this to imply you are not in Nevada with it?
View user's profile Send private message Visit poster's website
 
PostPosted: Sat Feb 06, 2010 1:36 am Reply with quote
Slavia
Moderator
Moderator
Joined: 31 Mar 2008
Posts: 4382
Location: Waseca, Minnesota, USA
Quote:
I can't believe you spent 1/2 hour carving one out yourself!

About 5 minutes.
Quote:
You cheap ba$tard!

Does that mean like when you get little Abraham Lincoln shaped dents in your finger from holding on to pennies too tightly?

Besides, I'm holding off on a Crosman purchase until I decide what my next project gun will be. I may need more than just the seal.
Quote:
Is this to imply you are not in Nevada with it?

She who must be obeyed is in Nevada visiting her brother. Mother, father, and sister are there with her. The camera is there with her. I am in Minnesota.

_________________
¡Listo! ¡Apunte! ¡Fuego!
View user's profile Send private message
 
PostPosted: Sun Feb 07, 2010 4:58 pm Reply with quote
packrat
Senior Member
Senior Member
Joined: 16 Nov 2009
Posts: 882
Location: Out in the woods...Ellabell, GA.
Well, that's certainly letting your MacGiver instincts show through...some of us newbie guys just order a couple of those with any order we might be placing with Crosman, since it does fit so many 22xx guns, and that way we always have one or two on hand...oh, it's a radical concept I know..but so far, well...it's working out pretty good. Mr. Green
just messing with ya, I actually ordered too many of them by mistake, if the truth be known-and the little sleeves also. Embarassed

_________________
HEY !! This getting old thing is NOT for sissies...
View user's profile Send private message Visit poster's website
 
PostPosted: Sun Feb 07, 2010 7:17 pm Reply with quote
Slavia
Moderator
Moderator
Joined: 31 Mar 2008
Posts: 4382
Location: Waseca, Minnesota, USA
Quote:
some of us newbie guys just order a couple of those with any order we might be placing with Crosman, since it does fit so many 22xx guns, and that way we always have one or two on hand...oh, it's a radical concept I know


Gee, you learn something new every day.

You'll be happy I mentioned this when Black Bart starts to circle the corral, and all that stands between you and oblivion is a pry bar and the tin siding on the shed. Oh wait, that was a Daisy Red Ryder. Never mind.

Aside from being cheap (as Eric will attest), I get satisfaction from re-purposing stuff (i.e., "Macgiverizing). I lived for a time in Guatemala, and it was great. Carnival merry-go-rounds hand cranked with automobile differentials. Bread ovens made from lard cans. I was in heaven.

_________________
¡Listo! ¡Apunte! ¡Fuego!
View user's profile Send private message
 
PostPosted: Sun Feb 07, 2010 8:26 pm Reply with quote
fritz
Silver Status Member
Silver Status Member
Joined: 25 Nov 2008
Posts: 2444
Location: New Jersey- outside of Philadelphia
So that was Slavia on that one episode of Macguyver...

Didn't know your mob family got their "product" from Guatemala. Razz

_________________
"I never set out to be wierd, it was always everyone else who called me it" -Frank Zappa

Speed is impressive, accuracy is deadly.

It's not that I'm not a people person, it's just that I'm not a stupid people person.
View user's profile Send private message AIM Address MSN Messenger
 
PostPosted: Sun Feb 07, 2010 10:05 pm Reply with quote
Slavia
Moderator
Moderator
Joined: 31 Mar 2008
Posts: 4382
Location: Waseca, Minnesota, USA
Quote:
So that was Slavia on that one episode of Macguyver...

That was me leaving the set with Penny Parker just before the last commercial. We had a mutual interest in airguns.

_________________
¡Listo! ¡Apunte! ¡Fuego!
View user's profile Send private message
 
PostPosted: Mon Feb 08, 2010 7:12 am Reply with quote
Alstone
Moderator & Site Supporter
Moderator & Site Supporter
Joined: 01 Mar 2007
Posts: 4139
Location: Linconshire, ENGLAND
I think all this criticism slavia is due to other air gunners worrying that you will put the American economy back into depression, by making things yourself and not spreading you vast wealth around the large industrial corporations of America.

So stop buggering about and buy a washer. Mr. Green

Al

_________________


View user's profile Send private message ICQ Number
 
PostPosted: Mon Feb 08, 2010 8:34 am Reply with quote
fritz
Silver Status Member
Silver Status Member
Joined: 25 Nov 2008
Posts: 2444
Location: New Jersey- outside of Philadelphia
Haha, Slavia is a stand up guy. Just bustin' his chops. Rolling Eyes

_________________
"I never set out to be wierd, it was always everyone else who called me it" -Frank Zappa

Speed is impressive, accuracy is deadly.

It's not that I'm not a people person, it's just that I'm not a stupid people person.
View user's profile Send private message AIM Address MSN Messenger
 
PostPosted: Mon Feb 08, 2010 11:26 am Reply with quote
broommaster2000
Moderator
Moderator
Joined: 10 Mar 2007
Posts: 5714
Location: City of Groningen, Groningen, The Netherlands
Slavia cheap? Got somethin' to do with Dutch? Wink

_________________
BIG GAP
View user's profile Send private message
 
PostPosted: Mon Feb 08, 2010 11:32 am Reply with quote
Slavia
Moderator
Moderator
Joined: 31 Mar 2008
Posts: 4382
Location: Waseca, Minnesota, USA
Quote:
Slavia cheap? Got somethin' to do with Dutch?

Not me, but I married one.

_________________
¡Listo! ¡Apunte! ¡Fuego!
View user's profile Send private message
 
PostPosted: Mon Feb 08, 2010 12:34 pm Reply with quote
broommaster2000
Moderator
Moderator
Joined: 10 Mar 2007
Posts: 5714
Location: City of Groningen, Groningen, The Netherlands
Slavia wrote:
Quote:
Slavia cheap? Got somethin' to do with Dutch?

Not me, but I married one.


That's what I ment. It's got something to do with it. Mr. Green

_________________
BIG GAP
View user's profile Send private message
2240 Seal 
  Air Gun Home Forum Index » Airgun Smithing
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 5 Hours  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  

Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.


Click Here for AirGunHome.com Main Page


Powered by phpBB © 2001-2004 phpBB Group
Partial Styling Supplied by Vjacheslav Trushkin Themes Database.