Air Gun Home :: View topic

Brutuz · Senior Member

You might have read about my old '92 1377 (second variant) in another topic. Bought it in parts, has seen some use and abuse. A previous owner tried to sort a worn and leaking breach by welding the barrel to the tube.

Tossed the barrel, did some work on the tube removing the welding marks.

Bought a new saftey spring and ball since those were missing and a new transfer port, wrapped some ptfe tape around it for an airtight fit.

Replaced a few damaged screws, the sear, the sear spring, front sight.

Fitted a 14" .22 barrel + breech that came from my upgraded 2289G backpacker, the steel bolt hadle came from a Crosman steel breech kit,

the extended probe was made by GMAC.

To protect the crown a custom "shorty" GMAC muzle brake has been fitted.

Would love to have a wooden pump arm + match grips but since I'm not loaded €€€ myself I fitted the green backpacker pistol grips that came with the 2289G and bought a green backpacker pump arm @ Steve.

To top it off I also ordered a Gmac curved wide blade trigger and asked Gordon if he could make one in a blackish finnish. He did and it gives the pistol the vintage look I hoped for.

A big thanks for Gordon @ http://www.gmaccustomparts.com/ and Steve @ http://www.sdcustomdesign.com/ for selling the spares, without these aftermarket part enthousiasts the 1377 would have ended in the bin.

So now it's kind of a 1377-1322-2289G-GMAC-SD cross breed, 6.61 fpe @ 10 pumps.

Here it is, hope you like it!

http://www.youtube.com/watch?v=IN2xt8QzSr0