Click Here for AirGunHome.com Main Page
Argentina Australia Belgium Canada Chile Denmark France Germany Greece India
Italy Mexico New Zealand Netherlands Norway Russian Federation South Africa Spain Turkey United Kingdom United States
AirGunHome.com: THE Worldwide Airgun Forum


RifleScope-Shop.com Store Logo
Air Gun Home Forum Index Register FAQ Memberlist Search

Air Gun Home Forum Index » Rifles » Fixing a Daisy Powerline 880
Post new topic  Reply to topic View previous topic :: View next topic 
Fixing a Daisy Powerline 880 
PostPosted: Sun Sep 27, 2009 1:41 pm Reply with quote
J5311
Member
Member
Joined: 30 Aug 2009
Posts: 35
Location: NJ
well my friends friend left if rifle at a cabin i had for 3 weeks and decided to take it since he hasn't gone to pick it up in 3 weeks since he lives 5 mins away...

when you would pump it you can hear air leaking so i just thought it would be the gaskets. so i decided to take it apart and it was really easy to do so.
After getting it totally disassembled I saw huge gashes on the side of the compression tube. I also looked inside and one of the gashes prodruded into the chamber which wasn't good.

So i went to the local hardware store and got some 600 grit sandpaper, #11 gaskets, And JB weld.

I sanded down the area that was inside the tube as best as i could and put the JB weld on the outside and worked it into the tube. after it dried i sanded it down once again.
Then I replaced the seals and lubed it with silicone grease. assembled it and no leaks now.....

But another problem arises. When I pump it It only has (estimating from the pistol I've fired) about 200 fps. And that is pumping it once or pumping it 8-10 times. Anyone have an idea it would be?
View user's profile Send private message
 
PostPosted: Thu Feb 04, 2010 5:58 pm Reply with quote
midnightsniper
Member
Member
Joined: 04 Feb 2010
Posts: 59
Location: Upstate,SC,USA
Do not know if you found the info you are looking for.I get seal kits ($40+$6 S&H) from http://www.daisyrepair.com/contact.htm and individual parts can be had through http://www.jgairguns.biz/

Here is JG Airguns parts break down.They have parts prices on their website.Just have to dig to find them or email them.

Usually the part numbers needed are
DAI880CS1
DAI880OA2 quantity 2
DAI717-22

and occassionally
CRS0241
DAI880-133081
DAI880FO


Here is the only parts diagram I have of the 880 with the full metal receiver.
View user's profile Send private message
Fixing a Daisy Powerline 880 
  Air Gun Home Forum Index » Rifles
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 5 Hours  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  

Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.


Click Here for AirGunHome.com Main Page


Powered by phpBB © 2001-2004 phpBB Group
Partial Styling Supplied by Vjacheslav Trushkin Themes Database.