 |  | | | |  |  |  |  | Gamo 1250 Hunter Hurricane, advice needed |  | |  |  |  |
Posted: Sat May 10, 2008 2:30 pm |
|
|
| simslee |
| New Member |

|
 |
| Joined: 10 May 2008 |
| Posts: 7 |
|
|
|
 |
Hi
I own a Gamo 1250 Hunter Hurricane in .177 caliber. It is probably a very stupid question but is it possible to convert it to .22 caliber by switching barrels without major modifications as I find it disappointing in .177 as it lacks punch and I think the pellets are to light for its high velocity so I find it not very accurate at long range.
Or can somebody recommend a pellet for this rifle or any other handy hints I should consider .
Thank you from Simon the novice |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sun May 11, 2008 9:14 am |
|
|
| AirGunEric |
| Site Admin |

 |
 |
| Joined: 20 Jan 2007 |
| Posts: 6931 |
| Location: "Out There" |
|
|
 |
Hello, Welcome to AirGunHome, Simon.
Gamo really doesn't seem to like .22's for some reason- almost everything they make comes in .177. What this means is that I'm not sure that a .22 barrel is available for the 1250. You would need the barrel and the receiver block where it attaches to the receiver and the geometry has to match on everything. Are there any .22 Gamo guns with a similar barrel/receiver that could be used? I don't know- maybe some other Gamo owners around here will be able to answer that.
But- I think you are on the right track- a .177 gun shooting around 1200fps is really a bit pointless in respect to accuracy- and .177 is also a bit small for "hunting" much of anything but very very small game and birds. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon May 12, 2008 1:09 am |
|
|
| simslee |
| New Member |

|
 |
| Joined: 10 May 2008 |
| Posts: 7 |
|
|
|
 |
Thank you for your advice, this Gamo Air rifle did come in .22 so I should be able to buy a barrel for it but I wonder whether it will marry up to the air chamber and does the air discharge hole stay the same size.
Simon |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon May 12, 2008 1:18 am |
|
|
| 23ib0d0n |
| Moderator |

 |
 |
| Joined: 21 May 2007 |
| Posts: 757 |
|
|
|
 |
| simslee wrote: |
Thank you for your advice, this Gamo Air rifle did come in .22 so I should be able to buy a barrel for it but I wonder whether it will marry up to the air chamber and does the air discharge hole stay the same size.
Simon |
How much money do you want to tie up in it? There are some custom buiders that can rebarrel a breech block, or even machine another block to fit a .22 barrel into.
As you may have guessed, however, these 'one off' parts have a serious price tag attached. If you like the hurricane more than the money, spend the money. It is your money, so be sure you like what you spend it on more than you like that money . . .  |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon May 12, 2008 1:46 am |
|
|
| simslee |
| New Member |

|
 |
| Joined: 10 May 2008 |
| Posts: 7 |
|
|
|
 |
| Blimey it sounds as if it might be better to put up with .177 caliber but look at heavy pellet like Eun Jin .177 pellets that weigh 16 gr |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon May 12, 2008 8:47 am |
|
|
| Slavia |
| Moderator |

 |
 |
| Joined: 31 Mar 2008 |
| Posts: 4382 |
| Location: Waseca, Minnesota, USA |
|
|
 |
Just out of curiosity, does anyone know what the ballistic coefficient for a .177/16gr pellet would be?
Or how a pellet that big would stabilize with a twist rate designed for a shorter projectile? Or does drag stabilization count for more than spin stabilization? |
|
_________________
¡Listo! ¡Apunte! ¡Fuego! |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon May 12, 2008 12:38 pm |
|
|
| broommaster2000 |
| Moderator |

 |
 |
| Joined: 10 Mar 2007 |
| Posts: 5714 |
| Location: City of Groningen, Groningen, The Netherlands |
|
|
 |
And Welcome aboard.  |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon May 12, 2008 12:57 pm |
|
|
| Rogerflat |
| Silver Status Member |

 |
 |
| Joined: 03 Jan 2008 |
| Posts: 2051 |
|
|
|
 |
| Quote: |
| Or how a pellet that big would stabilize with a twist rate designed for a shorter projectile? Or does drag stabilization count for more than spin stabilization? |
The answer is really only trivial, but it I would say its slight and negligible. Spin and drag are not so important with short range airguns as they are with powder burners. |
|
_________________ I done been assisted by the trees and rivers. Never needed any minister to figure my divinity. |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | Have you ever... |  | |  |  |  |
Posted: Sat May 24, 2008 5:41 pm |
|
|
| cliffspot |
| Veteran Member |

|
 |
| Joined: 15 Jun 2007 |
| Posts: 132 |
| Location: Miami via Hawaii |
|
|
 |
| ...chronyd your gun? Just because it says 1200fps (probably with PBA rubbish!) doesn't mean it does. Try a heavy pellet like a kodiak, or CPH. Cro mags are really good in my R1, they shoot about 925fps. The super heavy pellets are gonna kill your gun. They create a backlash harmonic on your spring because the pellet doesn't get moving fast enough, you can actually feel it if you have shot your gun a lot and know it's foibles. If you change to 22 cal, use the factory barrel with the cocking arm attached allready so you can switch it back and forth easier. The transfer port is the same for both cals, don't mess with it other than MAYBE a light polish. There are many interior dynamics going on in a springer, study and test is all you can do. But luckily there are many that have gone before us and are willing to share the knowledge! |
|
_________________ There are no accidents; only ignorance, mechanical failure, and acts of God! I have loaded over 6 million rounds in the last 5 years and STILL have not seen it all! |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sun May 25, 2008 2:39 am |
|
|
| simslee |
| New Member |

|
 |
| Joined: 10 May 2008 |
| Posts: 7 |
|
|
|
 |
Thank you very much your advise, it was a great help especially on the super heavy pellets as I was seriously considering them. Thank you for your help with the barrel but I am ahead of you on that, I have found a very good web site ( http://www.gunspares.co.uk/default.asp ) where there is a possibility of buying a .22 barrel, I also managed to buy a breech seal as my one was leaking which was not helping matters.
I will try the pellets that you recommend. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|