Click Here for AirGunHome.com Main Page
Argentina Australia Belgium Canada Chile Denmark France Germany Greece India
Italy Mexico New Zealand Netherlands Norway Russian Federation South Africa Spain Turkey United Kingdom United States
AirGunHome.com: THE Worldwide Airgun Forum


AirGunSeals.com Main Page Link
Air Gun Home Forum Index Register FAQ Memberlist Search

Air Gun Home Forum Index » Rifles » Maximum Power On A 22XX
Post new topic  Reply to topic View previous topic :: View next topic 
Maximum Power On A 22XX 
PostPosted: Sat May 03, 2008 4:09 am Reply with quote
broommaster2000
Moderator
Moderator
Joined: 10 Mar 2007
Posts: 5714
Location: City of Groningen, Groningen, The Netherlands
Well, finally time to start moving forward.

As you guys all know I got myself a Crosman 22-something with the already installed max-flow valve. It's also got a CB breech on it, and a 24" barrel. I'm kinda wondering what other mods can be done.

Now, I have been looking around, but some of you guys might have some more personal experience with these mods, so that's why I'm asking here.

I'd like to try and get it as powerfull as possible.

Thanks ahead! Wink

_________________
BIG GAP
View user's profile Send private message
 
PostPosted: Sun May 25, 2008 3:17 am Reply with quote
simslee
New Member
New Member
Joined: 10 May 2008
Posts: 7
I have just joined so I have not read your previous topics so excuse the stupid question but your Crossman an air source Air Rifle, what model is it? Has your modifications made alot of difference to its power?
I am asking because I have a Benjamin Sheridan .22 powered by an air source bottle and I have always wondered how to make it more powerful has anyone got any advice?. I do not think this model is made anymore it is the one where the bottle screws on under the barrel and has crappy sights.
View user's profile Send private message Visit poster's website
 
PostPosted: Sun May 25, 2008 6:36 am Reply with quote
AirGunEric
Site Admin
Site Admin
Joined: 20 Jan 2007
Posts: 6931
Location: "Out There"
Any Co2 gun, to get increased power output, needs more gas flow- i.e. valve modifications and gas pathway smoothing (if it's not optimal to start with). That being said, some guns don't get much more power even after modification without wasting a ton of Co2- the gas is still expanding long after the pellet is out the end of the barrel. How much power are you trying to achieve?

_________________
`

I'd say "I care."

But I'd be lying.


Canadian Airgun Supplier: http://www.scopesandammo.com/storefront
View user's profile Send private message Visit poster's website
 
PostPosted: Sun May 25, 2008 8:36 am Reply with quote
broommaster2000
Moderator
Moderator
Joined: 10 Mar 2007
Posts: 5714
Location: City of Groningen, Groningen, The Netherlands
I've heard from a friend that there are people who got 22 Ftp from their Crosman. I'm wondering how this could be achieved.

_________________
BIG GAP
View user's profile Send private message
 
PostPosted: Sun May 25, 2008 8:40 am Reply with quote
simslee
New Member
New Member
Joined: 10 May 2008
Posts: 7
It would be an interesting thing to find out how to do it
View user's profile Send private message Visit poster's website
 
PostPosted: Sun May 25, 2008 10:26 am Reply with quote
23ib0d0n
Moderator
Moderator
Joined: 21 May 2007
Posts: 757
broommaster2000 wrote:
I've heard from a friend that there are people who got 22 Ftp from their Crosman. I'm wondering how this could be achieved.
Why so little? Alot more can be had . . . Twisted Evil
View user's profile Send private message
 
PostPosted: Sun May 25, 2008 2:04 pm Reply with quote
broommaster2000
Moderator
Moderator
Joined: 10 Mar 2007
Posts: 5714
Location: City of Groningen, Groningen, The Netherlands
Hm I'm more wondering what can be achieved with CO2. Neutral

_________________
BIG GAP
View user's profile Send private message
 
PostPosted: Sun May 25, 2008 2:46 pm Reply with quote
simslee
New Member
New Member
Joined: 10 May 2008
Posts: 7
I looked at "a lot more could be had" very very impressive but the gun was totally rebuilt using parts from multiple guns and a lot of knowhow. I wonder if there is a simpler way just to beef one up to about 1000 fps, maybe a step by step guide for a novice. can anyone help?
All this makes my Gamo 1250 hunter look a bit wimpy I am getting an inferiority complex
View user's profile Send private message Visit poster's website
 
PostPosted: Sun May 25, 2008 3:33 pm Reply with quote
Mike AM
New Member
New Member
Joined: 22 Apr 2008
Posts: 9
Location: Southern Ontario
I've built these before with a great amount of success, but as was said a large waste of Co2 Gaz big time. I was lucky to get 17 full power shots outta a #2260 Rifle. Everything was modified including the Transfer Port outta Aluminum 1/4" into the Steel Breech with custom gaskets. I was getting well over 800+ fps. Also used an Adjuster from Art on it. The valve was a Max. I spilt everything up and sold it all to members at another forum along time ago. Buy a high quality springer alot cheaper to operate IMHO

Mike AM Smile
View user's profile Send private message
 
PostPosted: Sun May 25, 2008 4:08 pm Reply with quote
broommaster2000
Moderator
Moderator
Joined: 10 Mar 2007
Posts: 5714
Location: City of Groningen, Groningen, The Netherlands
Say, I got a leaking problem. I get only 5 shots from one fill, and it makes a farting sound. I think it has to do where the Barrel hits the valve with that little quaddidle thing that's supposed to lead the CO2 into the barrel.

How did you guys fix that?

_________________
BIG GAP
View user's profile Send private message
 
PostPosted: Sun May 25, 2008 5:21 pm Reply with quote
23ib0d0n
Moderator
Moderator
Joined: 21 May 2007
Posts: 757
broommaster2000 wrote:
Say, I got a leaking problem. I get only 5 shots from one fill, and it makes a farting sound.
The valve return spring is to light.
broommaster2000 wrote:
I think it has to do where the Barrel hits the valve with that little quaddidle thing that's supposed to lead the CO2 into the barrel.
The hammer is 'rebounding', then restriking the valve stem with enough force to start the process all over again.
broommaster2000 wrote:
How did you guys fix that?
Either use a lighter hammer, or put a stiffer valve return spring in it. If you want alot of shots, use a lightweight hammer.

If you want to get velocity, you have to balance out the amount that the hammer moves the stiff spring holding the valve shut. For the 9mm, a very stiff square die spring was used for valve return, and the weight of the hammer was nearly doubled.

Also, instead of the .041" hammer spring, a .050" hammer spring was used. The 9mm is very highly balanced for use at 1100psi from a regulated wevo tank. Using co2, it is getting just under 70fpe. If it were balanced slightly differently and flowed {larger} for co2, that number would be closer to 90fpe at 90°f {32°c} using the 150grain slug.

Did that answer the question? Twisted Evil
View user's profile Send private message
 
PostPosted: Mon May 26, 2008 12:41 am Reply with quote
broommaster2000
Moderator
Moderator
Joined: 10 Mar 2007
Posts: 5714
Location: City of Groningen, Groningen, The Netherlands
No. Mr. Green

Just messing with ya.

But the previous owner told me he had the problem before, and in his case it was that little part where the CO2 passes trough to the barrel.

_________________
BIG GAP
View user's profile Send private message
 
PostPosted: Mon May 26, 2008 7:45 am Reply with quote
Mike AM
New Member
New Member
Joined: 22 Apr 2008
Posts: 9
Location: Southern Ontario
If a too weak of a spring is used inside of the valve it will need to cocked or it won't pump up if its a pneumatic type pumper. The stronger hammer spring will push the valve open all of the time, unless cocked. Simple

Mike AM Razz
View user's profile Send private message
 
PostPosted: Mon May 26, 2008 8:54 am Reply with quote
23ib0d0n
Moderator
Moderator
Joined: 21 May 2007
Posts: 757
broommaster2000 wrote:
No. Mr. Green

Just messing with ya.

But the previous owner told me he had the problem before, and in his case it was that little part where the CO2 passes trough to the barrel.
When the transfer port seal is crimped or bound, back pressure is also able to rebound the valve off of the seat as well.

Another good reason to put in a fitted metal sleeve transfer port . . . Twisted Evil
View user's profile Send private message
 
PostPosted: Mon May 26, 2008 1:20 pm Reply with quote
broommaster2000
Moderator
Moderator
Joined: 10 Mar 2007
Posts: 5714
Location: City of Groningen, Groningen, The Netherlands
Hm, I'm going to try a number of things. By the way, for UK crosman fans, and other Europeans:

http://www.sdcustomdesign.com/

This guy is great to work with. He answers quickly, and let's you know in advance if he is leaving anytime soon, when you want to place an order. I recon that you can get most of these kind of parts in the US too, but I found that for the European market, he really is a good contact to have. Mr. Green

_________________
BIG GAP
View user's profile Send private message
Maximum Power On A 22XX 
  Air Gun Home Forum Index » Rifles
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 5 Hours  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  

Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.


Click Here for AirGunHome.com Main Page


Powered by phpBB © 2001-2004 phpBB Group
Partial Styling Supplied by Vjacheslav Trushkin Themes Database.