 |  | | | |  |  |  |  | What spring would I need to Reduce the Velocity of my Disco |  | |  |  |  |
Posted: Wed May 06, 2015 10:12 am |
|
|
| Ledbetter122 |
| Member |

|
 |
| Joined: 24 Feb 2015 |
| Posts: 30 |
|
|
|
 |
I'm looking into reducing my muzzle velocity, because for what I need it for (40 yards or less) is kinda too much for what I need plus ill get a couple more shots.
I'm wanting to tone it down to maybe 750 fps. I had seen on a post that the stock spring is 2" in length and the Wire Diameter was 0.035.
To take it down to 750 would I need a Spring that is 2.25" in length and 0.030 or 2" and 0.030.
What would be your recommendation? |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Wed May 06, 2015 10:19 am |
|
|
| rsterne |
| Moderator |

 |
 |
| Joined: 15 Jan 2008 |
| Posts: 2998 |
| Location: Coalmont, BC |
|
|
 |
Use the stock spring and a 0.109" ID transfer port from a Canadian 1377 (PM AirGunEric).... I sent you a PM regarding this....
Bob |
|
_________________ Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count! |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Wed May 06, 2015 7:13 pm |
|
|
| Ledbetter122 |
| Member |

|
 |
| Joined: 24 Feb 2015 |
| Posts: 30 |
|
|
|
 |
| rsterne wrote: |
Use the stock spring and a 0.109" ID transfer port from a Canadian 1377 (PM AirGunEric).... I sent you a PM regarding this....
Bob |
Thanks rsterne, I went ahead and tried the JB weld, and it seems like it ls going to work.....I factored in the jb weld cracking when drilling so what i did was fill the port and when the jb weld got stiff (about 5-10 mins) I hand drilled (twisted the bit with my fingers) with a 7/64 bit and now its drying.
Im probably still going to buy one from Airguneric (if he has one).
I was over intimidated by taking the gun apart, but it was extremely simple |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Wed May 06, 2015 8:17 pm |
|
|
| Ledbetter122 |
| Member |

|
 |
| Joined: 24 Feb 2015 |
| Posts: 30 |
|
|
|
 |
Wow it actually worked, I'm now getting 25 shots per fill, before i was getting 13-15.
I appreciate your help |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|